View UPC1688_159670.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEC's 1.0 GHz BANDWIDTH SILICON MMIC AMPLIFIER
FEATURES
* FLAT GAIN: GP = 1 dB TYP from 100 to 700 MHz * 1000 MHz FREQUENCY RESPONSE AT 3 dB DOWN * SINGLE 5 VOLT SUPPLY * NO EXTERNAL BIAS COMPONENTS REQUIRED * LOW COST PACKAGE * 50 GAIN BLOCK * AVAILABLE IN TAPE AND REEL
Noise Figure, NF (dB) Gain, GS (dB)
24
UPC1688G
NOISE FIGURE AND GAIN vs. FREQUENCY
GP 20 VCC = 5.5 V VCC = 5.0 V VCC =4.5 V
* 21 dB POWER GAIN AT 500 MHz
16
12 VCC = 5.5 V VCC = 5.0 V VCC =4.5 V NF 4
8
0 10 50 100 500 1000 2000
Frequency, f (MHz)
DESCRIPTION
NEC's UPC1688G is a silicon monolithic integrated circuit specifically designed as a flat gain, wide band amplifier covering the HF through the UHF band. It is particularly suited for low cost high performance amplifier applications. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance.
ELECTRICAL CHARACTERISTICS (TA = 25C, VCC = 5 V, f = 500 MHz, Zs = ZL = 50 )
PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GP PSAT NF BW ISOL RLIN RLOUT PARAMETERS AND CONDITIONS Circuit Current Power Gain Saturated Output Power, PIN = -5 dBm Noise Figure Bandwidth at 3 dB down below the gain at 100 MHz Isolation Input Return Loss Output Return Loss UNITS mA dB dBm dB MHz dB dB dB 900 23 10 10 MIN 14 18 2 UPC1688G 39 TYP 19 21 4 4 1100 27 13 13 5.5 MAX 24 23
CaliforniaEasternLaboratories
UPC1688G ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Supply Voltage Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V dBm mW C C RATINGS 6 +10 200 -40 to +85 -55 to +150
INPUT OUTPUT VCC
EQUIVALENT CIRCUIT
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. At TA = +85C.
GND
TYPICAL PERFORMANCE CURVES (TA = 25C)
SUPPLY CURRENT vs. VOLTAGE
32 28 NO INPUT SIGNAL
SUPPLY CURRENT vs. TEMPERATURE
32 VCC = 5 V 28
Supply Current, ICC (mA)
Supply Current, ICC (mA)
24 20 16 12 8 4 0 0 1 2 3 4 5 6
24 20 16 12 8 4 0 -60 -30 0 30 60 90 120 150
Supply Voltage, VCC (V)
Temperature, TA (C)
GAIN vs. FREQUENCY AND TEMPERATURE
24
OUTPUT RETURN LOSS vs. FREQUENCY AND VOLTAGE
10
Gain, GS (dB)
16
TA = -55 C TA = -20 C TA = +25 C TA = +85 C TA = +125 C
Output Return Loss, (dB)
20
0
-10 VCC =5.5 V -20
12
8
-30
4
-40
VCC = 5.0 V VCC = 4.5 V
0 10 50 100 500 1000 2000
-50 10 50 100 500 1000 2000
Frequency, f (MHz)
Frequency, f (MHz)
UPC1688G TYPICAL PERFORMANCE CURVES (TA = 25C)
SATURATED POWER vs. FREQUENCY AND VOLTAGE
10
THIRD ORDER INTERMODULATION vs. INPUT POWER AND VOLTAGE
Third Order Intermodulation, IM3 (dBc)
0 f1 = 500 MHz f2 = 502 MHz -10 -20
PIN = -5 dBm
Saturated Power, PSAT (dBm)
8
6
-30 -40 -50 -60 -70 VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V
4 VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V
2
0
-2 10 50 100 500 1000 2000
-20
-15
-10
-5
0
Frequency, f (MHz) INPUT RETURN LOSS vs. FREQUENCY AND VOLTAGE
10 VCC =5.5 V 0 0 VCC = 5.0 V 10
SSB Output Power, POUT (dBm)
ISOLATION vs. FREQUENCY
VCC = 5 V
Input Return Loss, (dB)
Isolation, (dB)
VCC = 4.5 V
-10
-10
-20
-20
-30
-30
-40 -50 10 50 100 500 1000 2000
-40
-50 10 50 100 500 1000 2000
Frequency, f (MHz) OUTPUT POWER vs. INPUT POWER AND FREQUENCY
10 f = 100 MHz VCC = 5.0 V
Frequency, f (MHz)
Output Power, POUT (dBm)
5
0 f = 1000 MHz -5 f = 500 MHz -10
-15
-20 -30 -25 -20 -15 -10 -5 0
Input Power, PIN (dBm)
UPC1688G TYPICAL SCATTERING PARAMETERS (TA = 25C)
UPC1688G: VCC =5.0 V, ICC =19 mA
FREQUENCY GHz 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 MAG 0.102 0.161 0.237 0.292 0.344 0.353 0.348 0.301 0.217 0.113 0.081 0.139 0.219 0.278 0.327 0.366 0.399 0.436 0.452 0.465 0.486 S11 ANG -85.7 -102.3 -110.4 -116.9 -123.9 -135.4 -152.8 -165.8 -175.0 -169.8 -116.2 -87.2 -82.3 -83.6 -86.8 -89.6 -91.6 -94.8 -96.7 -99.0 -99.3 MAG 11.040 11.632 12.054 12.328 12.515 12.578 12.466 11.899 10.564 8.983 7.466 6.170 5.177 4.330 3.684 3.161 2.742 2.423 2.178 1.991 1.814 S21 ANG -13.7 -31.0 -48.4 -62.8 -80.8 -102.2 -124.5 -148.8 -172.3 166.8 147.5 130.7 117.2 104.5 93.2 82.5 73.3 64.1 56.3 47.7 39.4 MAG 0.042 0.043 0.044 0.046 0.048 0.050 0.053 0.055 0.057 0.056 0.056 0.053 0.053 0.053 0.054 0.055 0.055 0.056 0.057 0.058 0.059 S12 ANG 3.2 -0.3 -1.1 -1.0 8.4 2.2 -1.7 -7.6 -11.6 -15.9 -18.3 -19.6 -19.6 -23.2 -24.4 -24.2 -27.2 -28.3 -29.0 -30.4 -28.4 MAG 0.073 0.089 0.100 0.111 0.136 0.153 0.172 0.192 0.222 0.270 0.318 0.350 0.374 0.385 0.390 0.387 0.380 0.371 0.352 0.339 0.319 S22 ANG -132.3 -148.8 -156.0 174.0 108.1 47.3 -16.6 -37.5 -60.5 -75.8 -90.6 -102.4 -112.9 -121.6 -129.1 -135.1 -141.0 -145.9 -149.8 -153.0 -155.3 1.30 1.23 1.17 1.10 1.00 0.94 0.93 0.96 1.02 1.14 1.25 1.45 1.60 1.80 1.97 2.17 2.44 2.62 2.86 3.06 3.27 k S21 dB 20.9 21.3 21.6 21.8 21.9 22.0 21.9 21.5 20.5 19.1 17.5 15.8 14.3 12.7 11.3 10.0 8.8 7.7 6.8 6.0 5.2
OUTLINE DIMENSIONS (Units in mm)
UPC1688G PACKAGE OUTLINE 39 (SOT-143)
+0.2 2.8 -0.3 +0.2 1.5 -0.1
ORDERING INFORMATION
PART NUMBER UPC1688G-TI QTY 3000/REEL
+0.10 0.4 -0.05 (LEADS 2, 3, 4)
2.9 0.2 0.95 0.85
2
3 1.9
C1C
1 +0.10 0.6 -0.05
4
+0.2 1.1 -0.1
0.8
0.16 +0.10 -0.06
PIN CONFIGURATIONS 1. GND 2. OUTPUT 3. VCC 4. INPUT
5 0 to 0.1
5
Note: All dimensions are typical unless otherwise specified.
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
07/01/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.

▲Up To Search▲

Price & Availability of UPC1688

	To Download UPC1688 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .